KOSUNI KOREA
Korean News in English
Business

Understanding the Designation Process and Required Documents for Large Aerial Work Platforms

Published October 7, 2026 · 2 views
Understanding the Designation Process and Required Documents for Large Aerial Work Platforms

대형 고소작업차 지정 절차와 필수 서류, 쉽게 알아보기

Overview of the Large Aerial Work Platform Designation Process

The Ministry of Land, Infrastructure and Transport designated large aerial work platforms (capable of working at heights over 100 meters) as construction machinery on August 10, 2026, allowing their use at construction sites. Previously, these machines existed in a legal gray area without mandatory safety inspections or registration requirements.

Key Points of the Large Aerial Work Platform Designation

Large aerial work platforms designed for operations over 100 meters are now classified as construction machinery subject to legal regulations. This classification expands their use at high-rise construction sites such as semiconductor factories and wind power plants, where previously they were not classified as construction machinery and thus lacked mandatory safety inspections or registration.

The Ministry announced the change on August 10, 2026, with improved regulations expected to enhance safety at construction sites. The requirement for pedestrian protection systems is a key measure designed to improve both worker safety and pedestrian protection around work areas, addressing previous gaps in legal regulation.

Verification of Designation Process and Required Documents

The government has not yet released specific details about the designation process or required documentation. Current information is based on the Ministry's announcement dated August 10, 2026, though detailed content of official documents remains unconfirmed.

Specific information regarding the designation process can be obtained through the Ministry of Land, Infrastructure and Transport website or local municipal construction departments. Relevant regulations will take effect after August 10, 2026, with potential additional registration procedures required for new introductions.

Large aerial work platforms classified as construction machinery will follow similar registration procedures to other construction equipment, requiring verification of pedestrian protection system installation and safety inspection results.

대형 고소작업차 지정 절차와 필수 서류, 쉽게 알아보기

Necessity of Enhanced Safety Standards

Given their use in high-altitude work environments, enhanced safety standards for large aerial work platforms are essential. The mandatory pedestrian protection system requirement is designed to ensure both worker and pedestrian safety around construction sites—a measure addressing previously inadequate legal regulation.

Strengthening safety standards is expected to increase trust in construction machinery registration and use while contributing to accident prevention at worksites, particularly for high-risk operations involving elevated structures that require additional safety equipment.

Expanded Use at Construction Sites

The classification of large aerial work platforms as construction machinery will likely expand their use at sites requiring high-rise construction such as semiconductor factories and wind power plants. Wind power facilities, which require work on tall towers, are expected to rely heavily on these platforms.

Similarly, semiconductor factory construction often requires work above 100 meters, previously posing challenges for introducing large equipment due to lack of legal classification. The new regulations now facilitate this process by improving the legal framework.

Related Regulations and Policy Changes

Along with the Ministry's announcement, Gyeonggi Province implemented a ban on driving vehicles rated as emission grade 5 starting November 29, 2021. While unrelated to large aerial work platforms, this policy illustrates an overall trend toward stricter regulations for equipment used in construction sites.

In 2026, the government also revised its subsidy program for replacing old commercial vehicles, ending support for grade 5 vehicles and strengthening subsidies for transitioning to low-emission grade 4 vehicles. This reflects increasing environmental regulation pressures on construction site equipment.

Response and Safety Information

Construction companies considering introducing large aerial work platforms must ensure installation of pedestrian protection systems and complete safety inspections as mandatory steps. These machines will undergo standard construction machinery registration procedures, requiring verification of certification from government agencies before use at worksites.

Safety inspection results and pedestrian protection system installations must be regularly checked by site supervisors, with any deficiencies immediately addressed. This is essential for both legal compliance and worker safety assurance.

Information to Verify

To confirm details about the designation process and required documents, construction companies should consult directly with the Ministry of Land, Infrastructure and Transport website or local construction department officials. Official document details remain unpublished, suggesting further announcements are likely following the government's initial announcement.

While registration procedures will be similar to those for standard construction machinery, additional documentation may be required due to the specialized nature of large aerial work platforms. For example, technical documents proving operation at heights over 100 meters or safety design drawings may be necessary.

Frequently Asked Questions

What is the designation process for large aerial work platforms?
The government has not yet published specific procedures. Companies should consult the Ministry of Land, Infrastructure and Transport website or local construction department officials for accurate information.

What does mandatory pedestrian protection system mean?
When using large aerial work platforms, protective barriers must be installed around work areas to protect pedestrians, which is now a legally required standard.

What should companies consider when introducing large aerial work platforms at construction sites?
Companies must verify the installation of pedestrian protection systems and safety inspection results, complete construction machinery registration procedures, and may need technical documentation proving operations above 100 meters in height.

Frequently Asked Questions

The Ministry's designation of large aerial work platforms as construction machinery is expected to simultaneously strengthen on-site safety and expand their use, particularly at semiconductor factories and wind power plant sites requiring over-100-meter operations. However, specific details about the designation process and required documents remain unpublished, so ongoing monitoring of government announcements is recommended.

Construction industry stakeholders should ensure pedestrian protection system installation and regular safety inspections upon introducing large aerial work platforms, while regularly checking for updates to relevant regulations as official documentation becomes available.

FAQ

What is the designation process for large aerial work platforms?

The government has not yet published specific procedures. Companies should consult the Ministry of Land, Infrastructure and Transport website or local construction department officials for accurate information.

What does mandatory pedestrian protection system mean?

When using large aerial work platforms, protective barriers must be installed around work areas to protect pedestrians, which is now a legally required standard.

What should companies consider when introducing large aerial work platforms at construction sites?

Companies must verify the installation of pedestrian protection systems and safety inspection results, complete construction machinery registration procedures, and may need technical documentation proving operations above 100 meters in height.

Korean Source

This article is an English localization of a Korean-language report from BlogScore. Original: 대형 고소작업차 지정 절차와 필수 서류, 쉽게 알아보기