KOSUNI KOREA
Korean News in English
News

Pyeongtaek Cosmetics Factory Fire: Cause and Damage Assessment

Published September 24, 2026 · 2 views
Pyeongtaek Cosmetics Factory Fire: Cause and Damage Assessment

Pyeongtaek Cosmetics Factory Fire Incident

A fire broke out at a Pyeongtaek cosmetics factory on September 1, 2025, due to an explosion of a steam machine, injuring 11 workers. Three were seriously injured, and structural damage with bent steel frames was confirmed.

평택 화장품 공장 화재, 원인과 피해 규모 확인 설명 이미지

Incident Details and Damage Scale

The accident occurred at the Pyeongtaek cosmetics factory's steam machine, likely caused by a hot steam explosion. According to reports, the incident happened around 10:00 AM on September 1, prompting an immediate fire department response. Three workers suffered serious injuries and were transported to hospitals, while eight others sustained minor injuries.

Structural damage with bent steel frames was confirmed at the scene, raising concerns about the building's structural integrity. Authorities believe workers were operating inside the factory when the explosion occurred, leading to a fire.

The bending of steel frames after the fire suggests the need for in-depth analysis of the building structure. The factory building, completed in 2018, has no confirmed safety inspection records from the past five years. This raises questions about potential negligence in management and aligns with regulations under the Occupational Safety and Health Act requiring regular structural safety inspections.

Incident Timeline and Immediate Response

The fire at the Pyeongtaek cosmetics factory occurred around 10:00 AM on September 1, 2025. According to the fire department, a report was received at 10:15 AM, with firefighters arriving within ten minutes to begin extinguishing efforts.

It is estimated that the fire resulted from an explosion of a steam machine, prompting immediate evacuation of workers. The fire was fully extinguished after over two hours, and most injured were treated on-site before being transported to hospitals.

The incident damaged equipment and products inside the factory, but no fatalities were reported. Three seriously injured workers are currently receiving treatment at a university hospital in Gyeongnam, with two requiring specialized skin regeneration therapy due to burn injuries and one undergoing surgery for internal organ damage.

Ongoing Investigation into Cause

The cause of the accident is suspected to be an explosion caused by hot steam, but an exact diagnosis will be determined through a joint inspection. Reports suggest that safety inspections of the factory's steam machines may have been insufficient.

A joint inspection team is conducting a thorough investigation at the scene, analyzing machinery and working conditions to determine the precise cause. Authorities stated that this incident will lead to strengthened safety inspection procedures within factories.

During the fire investigation, it is important to verify the manufacturing date and maintenance records of the machinery. Steam machines are high-temperature, high-pressure equipment requiring regular safety inspections. The Occupational Safety and Health Act mandates at least annual inspections, but no recent records were found for this factory.

Response and Safety Measures

Following the incident, government and local authorities took immediate action. Pyeongtaek City announced enhanced safety inspections in surrounding areas and plans to establish stricter standards to prevent similar accidents.

The Occupational Safety and Health Agency will conduct special inspections of all cosmetics manufacturing facilities, focusing on safety management of high-temperature, high-pressure equipment like steam machines. Additionally, safety education for workers will be strengthened.

Government officials are also discussing fire prevention measures in light of similar incidents, including a recent fire at an Incheon Geomdan-gu cosmetics factory reported on September 3, 2025. That incident was extinguished within three hours with no casualties.

Key Information to Verify

The confirmed details so far are: A fire caused by a steam machine explosion occurred at the Pyeongtaek cosmetics factory on September 1, 2025, injuring 11 workers, three of whom suffered serious injuries. The cause is suspected to be hot steam but will be determined through joint inspection.

Key points for readers: Structural integrity concerns due to bent steel frames require review of building design and maintenance records. The lack of recent safety inspection records for the steam machine raises questions about compliance with the Occupational Safety and Health Act.

Safety management in cosmetics manufacturing facilities has drawn attention following multiple fire incidents recently. This is analyzed as a result of equipment becoming more advanced without corresponding improvements to safety inspection systems. Therefore, both government and companies need to work on improving safety management systems.

Frequently Asked Questions

What caused the Pyeongtaek cosmetics factory fire?

The fire is suspected to have been caused by a steam machine explosion due to hot steam, but an exact cause will be determined following joint inspection results.

Are all injured workers receiving treatment?

Of the 11 injured workers, three are in critical condition and receiving treatment at a university hospital in Gyeongnam. The remaining eight sustained minor injuries and received emergency care before being transported to hospitals.

How will cosmetics factory fire incidents be managed moving forward?

The Occupational Safety and Health Agency plans to conduct special inspections of all cosmetics manufacturing facilities, with a focus on enhancing safety management for high-temperature, high-pressure equipment like steam machines.

Read More Related Articles

You can view similar articles in one place.

View Related Articles

FAQ

What caused the Pyeongtaek cosmetics factory fire?

The fire is suspected to have been caused by a steam machine explosion due to hot steam, but an exact cause will be determined following joint inspection results.

Are all injured workers receiving treatment?

Of the 11 injured workers, three are in critical condition and receiving treatment at a university hospital in Gyeongnam. The remaining eight sustained minor injuries and received emergency care before being transported to hospitals.

How will cosmetics factory fire incidents be managed moving forward?

The Occupational Safety and Health Agency plans to conduct special inspections of all cosmetics manufacturing facilities, with a focus on enhancing safety management for high-temperature, high-pressure equipment like steam machines.

Korean Source

This article is an English localization of a Korean-language report from BlogScore. Original: 평택 화장품 공장 화재, 원인과 피해 규모 확인