KOSUNI KOREA
Korean News in English
Technology

LG Drum Washer Rubber Gasket Replacement Guide: Step-by-Step Instructions

Published October 15, 2026 · 2 views
LG Drum Washer Rubber Gasket Replacement Guide: Step-by-Step Instructions

엘지드럼세탁기 고무패킹 교체 방법 10가지 단계별 가이드

How to Replace the Rubber Gasket on an LG Drum Washer

The rubber gasket on an LG drum washer requires regular cleaning and maintenance. If it becomes worn or torn, professional service should be requested. To prevent mold growth, open the door and detergent drawer after each wash to allow drying. Mold and dust can accumulate inside the drum, potentially causing respiratory and skin issues, so regular cleaning is important for health prevention.

엘지드럼세탁기 고무패킹 교체 방법 10가지 단계별 가이드

Cleaning the Rubber Gasket

The rubber gasket can be cleaned by wiping off moisture with toothpaste or a soft cloth. When cleaning the internal rubber gasket, using toothpaste or a soft cloth to remove moisture is recommended. Mold can be removed using hydrogen peroxide or citric acid, but never mix with bleach (chlorine-based products) as this creates dangerous chlorine gas. The inside of the drum washer often accumulates detergent residue and debris, so regular cleaning is advised.

Mold Prevention and Maintenance

After washing, leave the door and detergent drawer open to dry thoroughly. Black spots inside the rubber gasket indicate mold growth. Drum washers seal tightly when closed, making them more prone to mold compared to agitator models. Therefore, leaving the door and detergent drawer open after each use helps prevent mold and extends the life of the rubber gasket. Additionally, clean the interior by running a sanitize/wash cycle with hydrogen peroxide or drum cleaner, then wipe down with a damp cloth.

Checking Gasket Condition

An uneven or wrinkled appearance on the rubber gasket is normal due to design and not a defect. This natural formation occurs as part of the washer's structure, so there's no need for concern. However, if the gasket is torn or damaged, schedule professional service through a service manager to prevent leaks.

How to Clean Inside Your Washer

After washing, run one sanitize/warm water cycle and wipe down the interior with a dry cloth. Hydrogen peroxide or drum cleaner can be used for cleaning. During maintenance, replace the drain filter every 24 months and clean areas prone to detergent residue buildup using steam. Regular cleaning and care of the rubber gasket helps maintain washer performance and prevent mold.

Frequently Asked Questions

Can I replace the rubber gasket myself?

No, replacing the rubber gasket on an LG drum washer is difficult to do yourself; professional service is recommended.

Should I wipe off moisture after cleaning the gasket?

Yes, wiping off moisture after cleaning the gasket prevents mold growth.

Can I leave the washer door closed after washing?

No, you should leave the door and detergent drawer open to dry. Leaving it closed can cause water spots inside the rubber gasket.

See More Related Articles

You can view similar articles in one place.

View Related Articles

FAQ

Can I replace the rubber gasket myself?

No, replacing the rubber gasket on an LG drum washer is difficult to do yourself; professional service is recommended.

Should I wipe off moisture after cleaning the gasket?

Yes, wiping off moisture after cleaning the gasket prevents mold growth.

Can I leave the washer door closed after washing?

No, you should leave the door and detergent drawer open to dry. Leaving it closed can cause water spots inside the rubber gasket.

Korean Source

This article is an English localization of a Korean-language report from BlogScore. Original: 엘지드럼세탁기 고무패킹 교체 방법 10가지 단계별 가이드