HANUL Unit 4 Reactor Automatically Shut Down: Safety Measures and Prevention of Recurrence
Incident Overview and Investigation Status of Hanul Unit 4 Automatic Shutdown
The Hanul Unit 4 reactor automatically shut down on the morning of August 19, 2026. The Nuclear Safety Commission (NSC) has initiated an investigation without any radiation leakage detected. Korea Hydro & Nuclear Power (KHNP) temporarily halted operations to inspect for coolant pipe leaks.
Key Facts About the Hanul Unit 4 Automatic Shutdown Incident
The incident occurred on the morning of August 19, 2026, with no radiation leakage confirmed by the NSC. KHNP decided to temporarily halt operations to inspect for coolant pipe leaks and has also referred the matter to police regarding a parts supplier. Hanul Unit 4 was undergoing manual shutdown after failing to complete scheduled inspections.
Meanwhile, the NSC is conducting an investigation, while Hanul Units 2 and Saewool Unit 3 have received approval to restart following proper procedures. Hanul Unit 6 resumed power generation after completing repairs for a steam generator malfunction.
Incident Details and Measures Taken
The automatic shutdown of the Hanul Unit 4 reactor occurred on August 19, 2026, with the NSC commencing an on-site investigation. This appears to have followed KHNP's temporary shutdown for coolant pipe leak inspection.
On September 15, 2023, Hanul Unit 4 was also temporarily shut down for similar inspections. KHNP has referred a parts supplier to police and is addressing internal findings related to this incident.
In Hanul Unit 5, an unauthorized 'water level gauge' certificate was attached without calibration, which highlighted ongoing safety management issues relevant to the current situation.
Investigation into Causes and Safety Standard Review
The exact cause of the Hanul Unit 4 incident remains undisclosed. The NSC is conducting its investigation, while KHNP is taking further measures.
Given that Hanul Unit 4 was manually shut down without completing scheduled inspections, compliance with safety standards is a key focus. The NSC is reviewing all procedures before and after the incident. According to reports, Hanul Units 2 and Saewool Unit 3 have received restart approval, while Hanul Unit 6 resumed power generation after steam generator repairs were completed.
Local residents in Uljin have expressed concerns, prompting discussions about emergency response plans for other nuclear plants (Hanbit Units 1 & 2, Gori Units 3 & 4), indicating a nationwide safety review following the Hanul Unit 4 incident.
Measures to Prevent Recurrence and Safety Information
KHNP has temporarily halted Hanul Unit 4 for coolant pipe leak inspections and referred a parts supplier to police, marking concrete steps to strengthen nuclear plant safety management.
Considering Hanul Unit 4's manual shutdown without completing scheduled inspections, the NSC is conducting additional checks and verification. KHNP is addressing internal findings while referring the parts supplier to police to reinforce its safety management system.
With Hanul Units 2 and Saewool Unit 3 having received restart approval, their compliance procedures can serve as reference for Hanul Unit 4's measures. Similarly, Hanul Unit 6 resumed power generation after completing repairs, demonstrating a stable management system.

Key Information and Precautions to Note
Important information regarding the Hanul Unit 4 automatic shutdown incident includes: the exact cause and additional measures may not be disclosed until the NSC completes its investigation.
While local residents in Uljin have raised concerns, there has been no radiation leakage and the situation remains stable. Discussions about emergency response plans for other nuclear plants are ongoing, indicating a nationwide safety review following this incident.
Frequently Asked Questions
When did the Hanul Unit 4 automatic shutdown incident occur?
The incident occurred on the morning of August 19, 2026. The NSC has initiated an investigation without any radiation leakage detected.
Why is Hanul Unit 4 undergoing manual shutdown after incomplete scheduled inspections?
Manual shutdown was implemented to verify compliance with safety standards in the absence of completed scheduled inspections. The NSC is conducting an investigation into this matter.
Have Hanul Units 2 and Saewool Unit 3 received restart approval?
Yes, Hanul Units 2 and Saewool Unit 3 have been approved to restart following proper procedures, demonstrating a stable management system.
Frequently Asked Questions
The Hanul Unit 4 reactor automatically shut down on the morning of August 19, 2026, with no radiation leakage detected. The NSC has initiated an investigation. KHNP temporarily halted operations to inspect for coolant pipe leaks and referred a parts supplier to police.
While Hanul Units 2 and Saewool Unit 3 have received restart approval, Hanul Unit 6 resumed power generation after completing repairs for a steam generator malfunction. Local residents in Uljin expressed concerns, but the situation remains stable with ongoing discussions about emergency response plans for other nuclear plants.
The exact cause of the incident has not been disclosed yet and may be revealed following the NSC's investigation results. Compliance with safety standards and measures to prevent recurrence are key areas under review.
You can view similar articles in one place.
View Related ArticlesFAQ
When did the Hanul Unit 4 automatic shutdown incident occur?
The incident occurred on the morning of August 19, 2026. The NSC has initiated an investigation without any radiation leakage detected.
Why is Hanul Unit 4 undergoing manual shutdown after incomplete scheduled inspections?
Manual shutdown was implemented to verify compliance with safety standards in the absence of completed scheduled inspections. The NSC is conducting an investigation into this matter.
Have Hanul Units 2 and Saewool Unit 3 received restart approval?
Yes, Hanul Units 2 and Saewool Unit 3 have been approved to restart following proper procedures, demonstrating a stable management system.
Korean Source
This article is an English localization of a Korean-language report from BlogScore. Original: 한울4호기 자동정지, 안전 기준과 재발 방지를 위한 조치